from Part II - Combinational logic
Published online by Cambridge University Press: 01 February 2019
The specification for a digital system typically includes not only its function, but also the delay and power (or energy) of the system. For example, a specification for an adder describes (i) the function, that the output is to be the sum of the two inputs; (ii) the delay, that the output must be valid within 1 ns after the inputs are stable; and (iii) its energy, that each add consumes no more than 2 pJ. In this chapter we shall derive simple methods to estimate the delay and power of CMOS logic circuits.
DELAY OF STATIC CMOS GATES
As illustrated in Figure 5.1, the delay of a logic gate, tp, is the time from when the input of the gate crosses the 50% point between V0 and V1 to when the output of the gate crosses the same point. Specifying delay in this manner allows us to compute the delay of a chain of logic gates by simply summing the delays of the individual gates. For example, in Figure 5.1 the delay from a to c is the sum of the delay of the two gates. The 50% point on the output of the first inverter is also the 50% point on the input of the second inverter.
Because the resistance of the PFET pull-up network may be different than that of the NFET pull-down network, a CMOS gate may have a rising delay that is different from its falling delay. When the two delays differ, we denote the rising delay, the delay from a falling input to a rising output, as tpr and the falling delay as tpf, as shown in Figure 5.1.
We can use the simple switch model derived in Section 4.2 to estimate tpr and tpf by calculating the RCtime constant of the circuit formed by the output resistance of the driving gate and the input capacitance of its load(s).1 Because this time constant depends in equal parts on the driving and receiving gates, we cannot specify the delay of a gate by itself, but only as a function of output load.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.