Skip to main content Accessibility help
×
Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T20:27:42.439Z Has data issue: false hasContentIssue false

10 - Array Signal Processing, Calibration, and Beamforming

Published online by Cambridge University Press:  14 July 2018

Karl F. Warnick
Affiliation:
Brigham Young University, Utah
Rob Maaskant
Affiliation:
Chalmers University of Technology, Gothenberg
Marianna V. Ivashina
Affiliation:
Chalmers University of Technology, Gothenberg
David B. Davidson
Affiliation:
Curtin University, Perth
Brian D. Jeffs
Affiliation:
Brigham Young University, Utah
Get access

Summary

The general disciplines of calibrating phased arrays, constructing beam weighting coefficients, and performing computations on the output signals from a phased array system, all belong to broad field known as array signal processing. Basic topics from array signal processing, as well as advanced topics such as radio frequency interference mitigation, are surveyed in this chapter. For phased arrays used in demanding applications like radio astronomy, a priori array calibration methods generally are insufficiently accurate. In practice, array calibration generally involves measured signal responses or correlations with bright sources, so calibration is included here in the same treatment as beamforming and signal processing.

Beamforming

In the context of antenna array receivers, beamforming is the process of linearly weighting and combining signals from array elements in order to form a desired spatial response pattern. An example of response pattern is shown in Fig. 10.1. Beamforming can be viewed as spatial filtering where the discrete-in-space samples of the propagating wavefront (i.e., the outputs of the distinct antenna elements of the array, each in a different position) are used as inputs to a linear filter. Typically the beamformer is designed by adjusting the element weights to achieve higher gain, directivity, sensitivity, and signal to noise ratio than is possible from any single array antenna element. In the process, the high gain field of view is narrowed to a relatively small directional region know as the beam main lobe, or simply the beam. The lower response peaks outside this main lobe region are undesirable artifacts of the beamforming process and are pattern sidelobes.

Beams may be steered to a desired direction by inserting time delays in the signal path of each element to compensate for differential propagation delays across the array for wavefronts arriving from that direction. These time aligned signals sum coherently in the beamformer and so higher gain is achieved in the desired steering direction. For narrowband signals this steering time delay may be replaced by simply multiplying element signal streams by the equivalent complex phase shift e−jωkτi where ωk is the narrowband subband center radian frequency for the kth channel and τi is the alignment time delay correction for the ith element (this is equivalent to the phase shift derived in Sec. 4.1).

Information

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Book purchase

Temporarily unavailable

Save book to Kindle

To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×