Published online by Cambridge University Press: 03 June 2025
8.1 INTRODUCTION
Cylinders are the most commonly used structural elements used to convey fl uids under pressure/gravity, maintain pressure, and store the fl uids (e.g., water tanks, gas cylinders). Analysis of cylinders includes the determination of stresses and deformations developed due to internal pressure.
The cylinders are classifi ed into two categories.
1. Thin cylinders
2. Thick cylinders
Let ‘di’ and ‘t’ be the inner diameter and thickness of the cylinder, respectively. These cylinders are those for which. In this, inner diameter to thickness ratio is less than 20, and the corresponding cylinders are referred as thick cylinders. In case of thin cylinders, the variation of radial stress across the thickness is neglected. Thus, the thin cylinder analysis is approximate one.
In thick cylinder analysis, the variation of radial pressure across the thickness of the cylinder is not neglected. Thus, the thick cylinder analysis is more accurate than thin cylinder analysis. If the thickness of the cylinder is very less, thick cylinder analysis coincides with the thin cylinder analysis.
8.2 ANALYSIS OF THIN CYLINDERS
Internal pressure in cylinder increases the length and perimeter of the cylinders. Thus, it can be inferred that there exists tensile stress in the length direction as well as in the circumferential direction. The stress in longitudinal direction of cylinder is called longitudinal stress denoted by σl, and stress along the circumference or circumferential direction is referred as circumferential stress or hoop stress, denoted by σh. These two stresses are shown in Figure 8.2.
The hoop stress (σh) is sometimes called as bursting stress. Knowing these stresses, the change in the diameter, length and internal volume of the cylinder can be computed.
8.2.1 Expression for Hoop Stress and Longitudinal Stress
Consider a close cylinder, subjected to internal fl uid pressure ‘p’. Let ‘d’ and ‘t’ be the inner diameter and wall thickness of the cylinder, respectively. To evaluate the hoop stress (σh), cut the cylinder horizontally by section (1)-(1) as shown in Figure 8.3.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.