Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T07:52:53.777Z Has data issue: false hasContentIssue false

Simulation and Experiment of a Designed Anti-Drift Spray Nozzle

Published online by Cambridge University Press:  01 June 2017

W. Deng*
Affiliation:
National Engineering and Research Centre for Information Technology in Agriculture, Nongke Mansion, No.11 Shuguang Hua Yuan Middle Road, Haidian District, Beijing 100097,P.R.China
C. Zhao
Affiliation:
National Engineering and Research Centre for Information Technology in Agriculture, Nongke Mansion, No.11 Shuguang Hua Yuan Middle Road, Haidian District, Beijing 100097,P.R.China
L. Chen
Affiliation:
National Engineering and Research Centre for Information Technology in Agriculture, Nongke Mansion, No.11 Shuguang Hua Yuan Middle Road, Haidian District, Beijing 100097,P.R.China
R. Zhang
Affiliation:
National Engineering and Research Centre for Information Technology in Agriculture, Nongke Mansion, No.11 Shuguang Hua Yuan Middle Road, Haidian District, Beijing 100097,P.R.China
*

Abstract

This paper reports an investigation of the relationship between spray characteristics and a nozzles’ internal structure to reveal the working mechanism of anti-drift spray nozzles. Three important structural factors were taken into account, the diameter of the inner chamber, the angle of V-shaped slot and the relative kerf depth. Three-dimensional models of the fan nozzles were set up using Solidworks software and the corresponding real nozzles were produced using high-precision 3-D printer. The flow fields inside the nozzles were simulated using the software FLUENT. By comparing the flow fields inside and outside the nozzles under the conditions of the same inner structural parameter, the relationships between spraying flow characteristics and different structural parameters was made clear, and provides a reference for optimal design of anti-drift spray nozzles.

Figure 0

Figure 1Profile diagram of nozzle structure

Figure 1

Table 1The change of cavity diameter

Figure 2

Table 2The change of V-shaped groove angle

Figure 3

Table 3The change of relative cutting depth

Figure 4

Table 4The spray angle of each nozzle with a changing cavity diameter

Figure 5

Table 5The spray angle of each nozzle with the change of V-shaped groove angle

Figure 6

Table 6The changing curve of spray angle to the nozzle’s relative cutting depth