Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T22:45:21.998Z Has data issue: false hasContentIssue false

A Boundary Condition-Implemented Immersed Boundary-Lattice Boltzmann Method and Its Application for Simulation of Flows Around a Circular Cylinder

Published online by Cambridge University Press:  03 June 2015

X. Wang
Affiliation:
Department of Aerodynamics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Yudao Street, Nanjing 210016, China
C. Shu*
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Singapore
J. Wu
Affiliation:
Department of Aerodynamics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Yudao Street, Nanjing 210016, China
L. M. Yang
Affiliation:
Department of Aerodynamics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Yudao Street, Nanjing 210016, China
*
*Corresponding author. styled-contentURL:http://serve.me.nus.edu.sg/shuchang/, Email: mpeshuc@nus.edu.sg
Get access

Abstract

A boundary condition-implemented immersed boundary-lattice Boltzmann method (IB-LBM) is presented in this work. The present approach is an improvement to the conventional IB-LBM. In the conventional IB-LBM, the no-slip boundary condition is only approximately satisfied. As a result, there is flow penetration to the solid boundary. Another drawback of conventional IB-LBM is the use of Dirac delta function interpolation, which only has the first order of accuracy. In this work, the no-slip boundary condition is directly implemented, and used to correct the velocity at two adjacent mesh points from both sides of the boundary point. The velocity correction is made through the second-order polynomial interpolation rather than the first-order delta function interpolation. Obviously, the two drawbacks of conventional IB-LBM are removed in the present study. Another important contribution of this paper is to present a simple way to compute the hydrodynamic forces on the boundary from Newton’s second law. To validate the proposed method, the two-dimensional vortex decaying problem and incompressible flow over a circular cylinder are simulated. As shown in the present results, the flow penetration problem is eliminated, and the obtained results compare very well with available data in the literature.

Information

Type
Research Article
Copyright
Copyright © Global-Science Press 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable