Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T08:51:22.581Z Has data issue: false hasContentIssue false

Noise Prediction in Subsonic Flow Using Seventh-Order Dissipative Compact Scheme on Curvilinear Mesh

Published online by Cambridge University Press:  27 January 2016

Meiliang Mao
Affiliation:
State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, P.O. Box 211, Mianyang 621000, ChinaComputational Aerodynamics Institute, China Aerodynamics Research and Development Center, P.O. Box 211, Mianyang 621000, China
Yi Jiang*
Affiliation:
State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, P.O. Box 211, Mianyang 621000, ChinaComputational Aerodynamics Institute, China Aerodynamics Research and Development Center, P.O. Box 211, Mianyang 621000, China
Xiaogang Deng
Affiliation:
National University of Defense Technology, Changsha 410073, China
Huayong Liu
Affiliation:
State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, P.O. Box 211, Mianyang 621000, China
*
*Corresponding author.Email: yijiang@mail.ustc.edu.cn (Y. Jiang)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In this paper, we investigate the performance of the seventh-order hybrid cell-edge and cell-node dissipative compact scheme (HDCS-E8T7) on curvilinear mesh for noise prediction in subsonic flow. In order to eliminate the errors due to surface conservation law (SCL) is dissatisfied on curvilinear meshes, the symmetrical conservative metric method (SCMM) is adopted to calculate the grid metric derivatives for the HDCS-E8T7. For the simulation of turbulence flow which may have main responsibility for the noise radiation, the new high-order implicit large eddy simulation (HILES) based on the HDCS-E8T7 is employed. Three typical cases, i.e., scattering of acoustic waves by multiple cylinder, sound radiated from a rod-airfoil and subsonic jet noise from nozzle, are chosen to investigate the performance of the new scheme for predicting aeroacoustic problem. The results of scattering of acoustic waves by multiple cylinder indicate that the HDCS-E8T7 satisfying the SCL has high resolution for the aeroacoustic prediction. The potential of the HDCS-E8T7 for aeroacoustic problems on complex geometry is shown by the predicting sound radiated from a rod-airfoil configuration. Moreover, the subsonic jet noise from nozzle has been successfully predicted by the HDCS-E8T7.

Information

Type
Research Article
Copyright
Copyright © Global-Science Press 2016