Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T11:28:40.436Z Has data issue: false hasContentIssue false

An Evaluation of Deconvolution Techniques in X-ray Profile Broadening Analysis and the Application of the Maximum Entropy Method to Alumina Data

Published online by Cambridge University Press:  06 March 2019

Walter Kalceff
Affiliation:
Department of Applied Physics, University of Technology, Sydney PO. Box 123, Broadway NSW 2007, Australia
Nicholas Armstrong
Affiliation:
Department of Applied Physics, University of Technology, Sydney PO. Box 123, Broadway NSW 2007, Australia
James P. Cline
Affiliation:
Ceramics Division, National Institute of Standards and Technology Gaithersburg, MD 20899 USA
Get access

Abstract

This paper reviews several procedures for the removal of instrumental contributions from measured x-ray diffraction profiles, including: direct convolution, unconstrained and constrained deconvolution, an iterative technique, and a maximum entropy method (MEM) which we have adapted to x-ray diffraction profile analysis. Decorevolutions using the maximum entropy approach were found to be the most robust with simulated profiles which included Poisson-distributed noise and uncertainties in the instrument profile function (IPF). The MEM procedure is illustrated by application to the analysis for domain size and microstrain carried out on the four calcined α-alumina candidate materials for Standard Reference Material (SRM) 676 (a quantitative analysis standard for I/Ic determinations), along with the certified material. Williamson-Hall plots of these data were problematic with respect to interpretation of the microstrain, indicating that the line profile standard, SRM 660 (LaB6), exhibits a small amount of strain broadening, particularly at high 2θ angle. The domain sizes for all but one of the test materials were much smaller than the crystallite (particle) size; indicating the presence of low angle grain boundaries.

Information

Type
V. Residual Stress, Crystallite Size and rms Strain Determination by Diffraction Methods
Copyright
Copyright © International Centre for Diffraction Data 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable