No CrossRef data available.
Article contents
Multi-Capillary and Conic Optical Elements for Parallel Beam Production
Published online by Cambridge University Press: 06 March 2019
Extract
Large area, parallel beams of x-rays are potentially useful in many diffraction, imaging and other x-ray analysis applications. Diffraction, in typical experiments, uses only a small portion of the incident beam that is within a limited “rocking curve” of the crystal capable of diffracting, although the whole crystal may be illuminated by the incident beam. Signal intensity can be increased if the ”whole” crystal can be made to diffract simultaneously. Similarly for imaging, improved results also are possible if divergent beams are replaced with nearly parallel ones. Production of parallel beams of large areal extent has not been simple. Often this meant that the source had to be placed at great distances from the sample, reducing the incident intensity. Sometimes, asymmetric cuts of crystals can be used to increase beam cross-sectional areas.
Production of parallel beams of large area! extent has not been simple. Often this meant that the source had to be placed at great distances from the sample, reducing the incident intensity. Sometimes, asymmetric cuts of crystals can be used to increase beam cross-sectional areas.
Information
- Type
- Research Article
- Information
- Copyright
- Copyright © International Centre for Diffraction Data 1995
References
1.
Hughes, J., Schwartz, D., Szentgyoragyi, A., Van Speybroeck, L., and Zhao, P., “Surface Finish Quality of the Outer AXAF Mirror Pair Based on X-Ray Measurements of the VETA-I”, SPIE 1742, 152-161 (1992).Google Scholar
2.
Boettinger, W. J., Burdette, H. E., Kuriyama, M., and Green, R. E., Jr., “Asymmetric Crystal Topographic Camera”, Rev. Sci. Instrum.
47, 906–911 (1976).Google Scholar
3.
Klotzko, I., Xiao, Q. F., Gibson, D., Downing, R. G., Karnaukhov, A., Jezewski, C., and Gibson, W., “Investigation of Glass Polycapillaries for Use in Proximity X-Ray Lithography”, SPIE 2523, 174-182(1995).Google Scholar
4.
Dozier, C. M., Newman, D. A., Gilfrich, J. V., Freitag, R. K. and Kirkland, J. P., in Advances in X-Ray Analysis
37, Ed. Gilfrich, J. V., et at., Plenum Press, New York, NY, 499-506 (1994).Google Scholar
5.
Kumakhov, M. A., “Channeling of Photons and New x-ray Optic”, Nucl. Instr. Meth, B48, 283–286 (1990).Google Scholar
6.
Espy, S. L., O, D. B.'Hara, Scarborough, S. and Price, M. L., “Conical Foil Optics for Collimation of Soft X-Rays”, SPIE 2279, 110–120 (1994).Google Scholar
7.
Fraser, G. W., Brunton, A. N., Lees, J. E., Pearson, J. F., Willingale, R., Emberson, D. L., Feller, W. B., Steadman, M., and Haycocks, J., “Development of MicroChannel Plate (MCP) X-ray Optics”, SPIE 2001, 215-226 (1994).Google Scholar
8.
Franco, E. D., Boyle, M. J., Kerner, J. A., Koppel, L., and Ormond, R. D., “What Is Required for Collimated Point Source Lithography to Achieve an Economically Viable Throughput”, SPIE 1924, 371–380 (1993).Google Scholar
9. Obtained from Home Page posted on the Internet WWW by Intel, Inc., “Advances in Manufacturing Process Technology”, 5 July 1995.Google Scholar
10. Semiconductor Industry Association, The National Technology Roadman for Semiconductors, p. 81f (1994).Google Scholar
11. Defense Advanced Lithography Program, Point Source Collimation Workshop II, Scottsdale, AZ, 27 January 1995.Google Scholar
12. Kardiawarman, York, B. R., Qian, C., Xiao, Q. F., MacDonald, C. A., and Gibson, W. M. “Application of Multi-fiber Collimating Lens to Thin Film Structure Analysis”, SPIE 2519, 197-206 (1995).Google Scholar
13.
Garnaes, J., Christensen, F. E., Besenbacher, F., Laegsgaard, E. and Stensgaard, I., “Scanning Tunneling Microscopy Studies of Thin Foil X-Ray Mirrors”, Opt. Eng. 29, 666-671 (1990).Google Scholar