Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T22:42:36.788Z Has data issue: false hasContentIssue false

Residual Stress and Microstructural Characterization Using Rietveld Refinement of a Carburized Layer in a 5120 Steel

Published online by Cambridge University Press:  06 March 2019

P. Rangaswamy
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
M.A.M. Bourke
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
A. C. Lawson
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
J.O' Rourke
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
J. A. Goldstone
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
Get access

Extract

Rietveld refinement of X-ray diffraction patterns has been used to provide microstructural information complementary to conventional X-ray residual stress measurements through a carburized layer containing a maximum vol. 25 % of retained austenite. Layers in a simple specimen were removed incrementally by electropolishing and, at each depth in addition to conventional residual stress measurements in both the martensite and retained austenite, data were collected at ѱ = 0 for Rietveld refinement. The refinements provide accurate values for the lattice parameters in the respective phases that can be related to carbon content and micro-structure. Besides to providing qualitative information concerning the microstructure and possible surface decarburization, the c/a ratio of the martensite potentially offers an independent technique for determining carbon content profiles

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable