Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T19:53:51.614Z Has data issue: false hasContentIssue false

Residual Stress Relaxation in Cemented Carbide Composites Studied Using the Argonne Intense Pulsed Neutron Source

Published online by Cambridge University Press:  06 March 2019

A. D. Krawitz
Affiliation:
University of Missouri, Columbia, MO 65211
R. Roberts
Affiliation:
University of Missouri, Columbia, MO 65211
J. Faber
Affiliation:
University of Missouri, Columbia, MO 65211
Get access

Abstract

Cemented carbide composites with a WC hard phase and a Co-Ni alloy binder phase have been subjected to monotonic and cyclic deformation and studied using the high resolution General Purpose Powder Diffractometer at the Argonne Intense Pulsed Neutron Source. Upon deformation, relaxation of bulk differential thermal residual stresses, tensile in the binder and compressive in the carbide, is observed to occur as a function of loading mode and plastic strain via shifts in diffraction peak positions. In addition, peak breadth behavior indicates broadening. At low plastic strain this is due primarily to a range of residual stress and at high plastic strain it is attributable to the plastic deformation alone since relaxation is essentially complete. The appropriateness of neutrons is discussed.

Information

Type
II. X-Ray Strain and Stress Determination
Copyright
Copyright © International Centre for Diffraction Data 1983

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable