Hostname: page-component-74656f9884-rdgjk Total loading time: 0 Render date: 2026-11-08T22:24:32.080Z Has data issue: false hasContentIssue false

An Approach to the Solid Solution Problem Using a Computerized Identification Technique

Published online by Cambridge University Press:  06 March 2019

Gerald G. Johnson Jr.
Affiliation:
Pennsylvania State University, University Park, Pa.
Frank L. Chan
Affiliation:
Wright-Patterson Air Force Base, Ohio
Get access

Abstract

Since for most real systems, solid solution effects influence the position and intensity of the x-ray powder diffraction pattern, it is desirable and necessary to have an automatic system which will identify standard reference phases regardless of the amount of solid solution. Using the system CdS-ZnS, where the lattice parameter a0 changes from 4.136 to 3.820Å, with complete solid solution over the entire range of composition, an illustrative study was made. This work presents the results obtained from a computer analysis of the powder pattern obtained. It has been found thatif the starting chemistry is known andthe end members of the series are in the ASTM Powder Diffraction File, that the solid solution can be identified. Once the phases present are identified, a plot following Vegard's law yields the approximate composition of the sample under consideration. These two methods of compositional determination agree quite well. Examples of the computer system and description of the program input and output with interpretation of the results will be discussed.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1969

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable