Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T09:33:39.732Z Has data issue: false hasContentIssue false

Correlation of Residual Stress Level and Fatigue Damage in B. C. C. Metals

Published online by Cambridge University Press:  06 March 2019

G Koves*
Affiliation:
IBM Systems Development Division Rochester, Minnesota 55901
Get access

Abstract

The development of materials with optimum fatigue characteristics hinges on a better understanding of the fatigue mechanism ( i .e ., fatigue crack nucleation and propagation) under specific loading conditions. A correlation was established between the residual macroscopic stress level--as measured by x-ray diffraction analysis, the fatigue damage in the form of slip-band formation and intensification, and the fatigue life at various applied stress levels of pure iron and low-carbon steel.

Residual stresses were measured by an automated diffractometer technique (Fe 211 Kα reflection, Cr radiation) and computer calculation of both macroscopic (line shift) and microscopic (line broadening) stresses . Surface fatigue damage was observed by optical microscopy.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1969

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable