Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T05:14:18.941Z Has data issue: false hasContentIssue false

Depth of Saw and Lap Damage in Germanium

Published online by Cambridge University Press:  06 March 2019

John F. Knudsen*
Affiliation:
Honeywell Semiconductor Division Riviera Beach, Florida
Get access

Abstract

A study utilizing an application of X-ray diffraction analysis has been made to determine the depth of surface damage in s ingle-crystal wafers of germanium. Damage was introduced by mechanical lapping and sawing. A scintillation-counter double-crystal diffractometer system was used with a 3-m evacuated collitnator. This experimental arrangement employed the (220) reflection, from a silicon monochromator, using Cu Kα1 radiation. All wafers were taken from dislocation-free crystals which were subsequently centerless ground, sawed, lapped, and etched. Half-widths were determined for the sawed and lapped conditions. Successive etchings were used to remove the damaged surface layer with the resulting halfwidths being plotted as a function of thickness removed and etching time.

The depths of damage—8.0 ± 0.7 μ for sawing and 3.0 ± 0.7 μ for lapping—were indicated by the depth at which the line breadth measurements reached a limiting value. For crystals used in this study, the median value for this limiting half-width was 28″. The experimental data expressing the rate of etching indicates the presence of two separate rates—one for the damaged material and one for the undamaged substrate. An unexpected finding is a faster etch rate for the undamaged material than that observed for the damaged layer. Quite good correlation is obtained between the depth of damage as determined by X-ray and etching techniques.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1963

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable