Hostname: page-component-74656f9884-2dmjx Total loading time: 0 Render date: 2026-11-09T23:10:05.070Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental and Calculated Standards For Quantitative Analysis by Powder Diffraction

Published online by Cambridge University Press:  06 March 2019

C. R. Hubbard  and
D. K. Smith
C. R. Hubbard
Affiliation:
Institute for Materials Research National Bureau of Standards Washington, D. C. 2023k
D. K. Smith
Affiliation:
Department of Geosciences Pennsylvania State University University Park, PA 16802
Get access

Abstract

Quantitative analysis by x-ray powder diffraction methods has become increasingly important in recent years with the availability of computer-controlled automatic powder diffractometers. All data gathering techniques require suitable reference standards to scale the measured data properly. One means of achieving this scaling is through the reference Intensity ratio which is defined as the intensity ratio of the strongest diffraction maximum of a substance to the strongest maximum of a reference material in a 1:1 mixture “by weight. These ratios may he measured or they may he calculated if the crystal structures of the materials are accurately known.

Information

Type
X-Ray Powder Diffraction
Information
Advances in X-Ray Analysis , Volume 20: Twenty-Fifth Annual Conference on Applications of X-ray Analysis, August 4-6, 1976 , 1976 , pp. 27 - 39
Copyright
Copyright © International Centre for Diffraction Data 1976

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Hanawalt, J. D., Rinn, H. W. and. Frevel, L. K., “Chemical Analysis by X-ray Diffraction,” Ind. Eng. Chem., Anal. Ed., 10, 457–467 (1938).Google Scholar
2. Hubbard, C. R., Evans, E. H., and Smith, D. K., “The Reference Intensity Ratio, I/Ic, for Computer Simulated Powder Patterns,” J. Appl. Cryst. 9, 169–174 (1976).Google Scholar
3. Jennings, L. D. “Current Status of the I.U.Cr. Powder Intensity Project,” ActaCryst.A25, 217–222 (l969).Google Scholar
4. Azaroff, L. V., “Polarization Correction for Crystal-Monochromatized X-radiation,” ActaCryst. 8, 701–704 (1955).Google Scholar
5. Clark, C. M., Smith, D. K. and Johnson, G. G. Jr., “A FORTRAN IV Program for Calculating X-ray Powder Diffraction Patterns - Version 5,” Department of Geosciences, Pennsylvania State Univ., University Park, PA. 16802.Google Scholar
6. James, R. W., The Optical Principles of the Diffraction of X-rays p. 61–62 G. Bell and Sons (1950).Google Scholar
7. Klug, H. P. and Alexander, L. E., X-ray Diffraction Procedures, second edition, p. 365–368. John Wiley and Sons, (1974).Google Scholar
8. ibid p. 368–376.Google Scholar
9. ibid. p. 537.Google Scholar
10. “Standard X-ray Diffraction Patterns,” Monograph 25, Sections 7-13, Crystallography Section, National Bureau of Standards, Washington, D. C. 20234.Google Scholar
11. Newnhatn, R. E. and deHaan, Y. M. “Refinement of the α-Al2O3, Ti2O3, V2O3 and Cr2O3structures,” Zeit. Krist. 117, 235–237 (1962).Google Scholar
12. Jenkins, R. and Paolini, F. R., “An Automatic Divergence Slit for the Powder Diffractometer,” Norelco Reporter 21, No. 1, p. 9–14 (1974).Google Scholar
13. Chung, F. H., “Quantitative Interpretation of X-ray Diffraction Patterns of Mixtures,” J. Appl. Cryst. 7, 519–531, (1974).Google Scholar
14. JCPDS, “Search Manual - Inorganic Compounds/Alphabetical Listing SMA-25, P. 895–905 (1975) Joint Committee on Powder Diffraction Standards, 1601 Park Lane, Swarthmore, PA 19081.Google Scholar