Hostname: page-component-7b7567c8c-mnklg Total loading time: 0 Render date: 2026-11-12T22:08:49.617Z Has data issue: false hasContentIssue false
  • English
  • Français

Measuring Triaxial Stresses in Embedded Particles by Diffraction

Published online by Cambridge University Press:  06 March 2019

C. S. Barrett and
P. K. Predecki
C. S. Barrett
Affiliation:
University of Denver Research Institute, Denver, Colorado
P. K. Predecki
Affiliation:
University of Denver Research Institute, Denver, Colorado
Get access

Extract

The method presented In 1976 for measuring stresses in polymeric materials including fiber-reinforced composites (1,2) yielded directly only one or two of the principal stresses and (elastic) strains in the embedded crystalline particles. The method is now extended so as to yield determinations of all three principal stresses σ1, σ2, σ3 and strains, ε1, ε2, ε3, The method applies to both residual and applied stresses and strains.

High angle diffractometry such as is used in ordinary X-ray stress determinations in metal objects is used, with suitable particles being embedded in a homogeneous plastic or reinforced composite before curing.

Information

Type
Note
Information
Advances in X-Ray Analysis , Volume 21: Twenty-Sixth Annual Conference on Applications of X-ray Analysis, August 3-5, 1977 , 1977, pp. 305 - 307
Copyright
Copyright © International Centre for Diffraction Data 1977

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Barrett, C.S. and Predecki, Pauls, “Stress Measurement in Polymeric Materials by X-Ray Diffraction,” Polymer Eng. and Sci. 16, 602, 1976.Google Scholar
2. Barrett, C.S., “Diffraction Technique for Stress Measurement in Polymeric Materials,” Adv. in X-Ray Anal. Vol. 20, 329, 1977.Google Scholar
3. “Residual Stress Measurement by X-Ray Diffraction,” SAE Handbook Supplement SAE J784a, Second Edition, 1971, Soc. of Automotive Engineers. Warrendale, PA 15096.Google Scholar
4. Barrett, C.S. and Massalski, T.B., “Structure of Metals,” 3rd ed., McGraw Hill, New York, 1966, pages 471–472.Google Scholar