Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-14T08:56:30.104Z Has data issue: false hasContentIssue false

The Processing of Energy Dispersion X-Ray Data in a Timesharing Computer

Published online by Cambridge University Press:  06 March 2019

Harold E. Marr
Affiliation:
U. S. Bureau of Mines, College Park, Maryland 207^0
William J. Campbell
Affiliation:
U. S. Bureau of Mines, College Park, Maryland 207^0
Get access

Abstract

A time-sharing computer was used in conjunction with a semiconductor detector and radioisotopic sources to evaluate energy dispersion x-ray analysis for the rapid analysis of copper base alloys. The time-sharing computer served two purposes: to aid in the development of the analytical method and to simulate the action of a dedicated computer that would eventually be used as part of an on-line analytical device. Some of the general capabilities of time-sharing computers are discussed in this paper with some emphasis on the differences between the computer requirements of energy dispersive x-ray methods and conventional x-ray spectrography.

An annular source of americium 24l was used with a secondary fluorescer to excite 23 brass and bronze alloys. The 400 channel spectrum from a multichannel analyzer was recorded on paper tape. A telephone coupled teletype was used to transmit the X-ray spectrum to the central processing facility. Curve fitting and statistical analysis programs similar to those available from most commercial time-sharing computer operations were utilised as well as other programs written at this laboratory for processing digitized spectra.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1972

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable