Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T16:13:40.394Z Has data issue: false hasContentIssue false

Quantitative X-Ray Diffraction Phase Analysis of the Oxidation of Steel by a Direct Comparison Method

Published online by Cambridge University Press:  06 March 2019

R. R. Biederman
Affiliation:
Worcester Polytechnic Institute, Worcester, Massachusetts 01609
R. F. Bourgault
Affiliation:
Worcester Polytechnic Institute, Worcester, Massachusetts 01609
R. W. Smith
Affiliation:
Worcester Polytechnic Institute, Worcester, Massachusetts 01609
Get access

Abstract

A direct comparison x-ray method using crystal structure Information has been developed for rapid quantitative analysis of the oxide phases present in oxidized steels. This procedure is similar to that used for the analysis of retained austenite in hardened steels and requires no external or internal standards for accurate oxide determinations. Successful application of this technique has been achieved for a variety of steel oxide mixtures and excellent correlation with microstructural analysis results has been found. Accurate determinations have been made of the volume fractions of Wustite (FeO), Magnetite (Fe3O4) and Hematite (Fe2O3) for a wide range in steel carbon content and transformation treatments. Many oxide mixtures that differ over a wide range in the amounts of each of the three oxides phases have been measured successfully. The procedure is simple, the method direct and the analysis accurate.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1973

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable