Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T20:21:06.847Z Has data issue: false hasContentIssue false

Size/Strain Broadening Analysis of SRM 676 Candidate Materials

Published online by Cambridge University Press:  06 March 2019

Walter Kalceff
Affiliation:
Department of Applied Physics, University of Technology, Sydney P.O. Box 123, Broadway, NSW 2007, Australia
James P. Cline
Affiliation:
Ceramics Division, National Institute of Standards and Technology Gaithersburg, MD 20899, USA
Robert B. Von Dreele
Affiliation:
LANSCE, MS-H805, Los Alamos National Laboratory Los Alamos, NM 87645, USA
Get access

Abstract

A project was undertaken to compare the Williamson-Hall and Fourier teclrniques for analyzing particle-size and micro-strain induced x-ray line profile broadening. The four alumina powders analyzed in the study were the candidates from which SRM 676, a quantitative analysis Standard Reference Material, was chosen. SRM 660 (LaB6) was used to determine the instrument profile function, IPF. However, difficulty was encountered in fitting an appropriate mathematical model to the IPF data; this prevented the application of Fourier analysis methods and restricted the number of profiles that could be analyzed with the Williamson-Hall method. The size/stain data compared favorably with other microstructural data collected on these specimens.

Information

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable