Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T07:11:53.766Z Has data issue: false hasContentIssue false

An experimental and computational investigation of ground effect lift loss for single jet impingement

Published online by Cambridge University Press:  04 July 2016

Dan N. Ing
Affiliation:
Logico Systems
Xin Zhang
Affiliation:
University of Southampton

Abstract

An investigation was carried out to study the parameters affecting single-jet ground-effect hover lift loss and to identify the cause(s) behind the large discrepancies in lift loss between the experiments of Wyatt of RAE Bedford and Corsiglia et alof Nasa Ames. The cause of the discrepancies was traced to a single geometrical parameter: baffle plate edge geometry, which significantly affected the flow separation underneath the plate. In contrast, the out-of-ground lift loss is insensitive to the edge geometry, but can be significantly affected by room size restriction. The investigations have highlighted the importance of accurately representing the edge geometry in ground effect testing of Vstol aircraft, and the importance of the test environment when conducting out-of-ground hover experiments.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1994 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable