Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T00:41:43.829Z Has data issue: false hasContentIssue false

Assessment of turbulence model performance for transonic flow over an axisymmetric bump

Published online by Cambridge University Press:  04 July 2016

R. G. M. Hasan
Affiliation:
Dept of Aeronautical and Automotive Engineering, Loughborough University, UK
J. J. McGuirk
Affiliation:
Dept of Aeronautical and Automotive Engineering, Loughborough University, UK

Abstract

A computational study has been performed to evaluate the predictive capabilities of some existing eddy-viscosity (both linear, LEVM, and non-linear, NLEVM) and Reynolds stress transport turbulence models (RSTM) by reference to a transonic shock-induced separated flow over a 10% axisymmetric bump. The calculations have been carried out during the course of a collaborative research programme including both UK universities and industry. The findings of the project demonstrate that improved results can be obtained for such flows by using more advanced turbulence models. For linear eddy-viscosity models, only the SST approach gave good predictions of shock location, recirculation size and pressure recovery, although this was accompanied by deficiencies in the prediction of post-shock velocity profile shape. Non-linear eddy-viscosity models, particularly at the cubic level, provided a more consistent level of agreement with experiments over the range of shock location, wall pressure and velocity profile parameters. Some improvement was also seen in the prediction of turbulence quantities, although only a move to an RSTM closure model reproduced the measured peak stress levels accurately. It was notable that the use of low-Re variants of the models (instead of wall functions) produced no significant improvement in predictions. There are, however, some shortcomings in all models, particularly in the development of flow after reattachment, which was always predicted to be too slow.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2001 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable