Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:56:01.235Z Has data issue: false hasContentIssue false

Computer studies of hybrid slotted working sections with minimum steady interference at subsonic speeds

Published online by Cambridge University Press:  04 July 2016

D. G. Mabey
Affiliation:
Royal Aircraft Establishment, Bedford
F. W. Steinle
Affiliation:
NASA Ames

Summary

Currently there is renewed interest in the evaluation and reduction of steady wind tunnel wall interference, especially for large models.

Evaluation of previous predictions for perforated and slotted tunnels suggests that a hybrid slotted tunnel, ie a slotted tunnel with closed slats and perforated slots) should offer minimum corrections for upwash, flow curvature and solid blockage. This suggestion is confirmed by the present computer studies of a range of rectangular hybrid slotted tunnels.

The computer studies are for tunnel working section height to breadth ratios of 0·835 and 0·600 over the Mach number range from 0 to 0·85. Wings swept at 28° and 50°, with ratios of model span to tunnel breadth varying from 0 to 0·7, are considered. An idealised fuselage shape is used to predict solid and wake blockage corrections for the wall configurations selected on the basis of minimum upwash and curvature interference.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1985 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable