Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T01:35:49.023Z Has data issue: false hasContentIssue false

Constant temperature hot-wire measurements in a short duration supersonic wind tunnel

Published online by Cambridge University Press:  04 July 2016

J. Weiss
Affiliation:
Institut für Aerodynamik und Gasdynamik (IAG) Universität Stuttgart, Germany
H. Knauss
Affiliation:
Institut für Aerodynamik und Gasdynamik (IAG) Universität Stuttgart, Germany
S. Wagner
Affiliation:
Institut für Aerodynamik und Gasdynamik (IAG) Universität Stuttgart, Germany
A. D. Kosinov
Affiliation:
Institute for Theoretical and Applied Mechanics (ITAM) Novosibirsk, Russia

Abstract

A constant temperature hot-wire anemometer enabling automatic rapid scanning of the wire overheat was built to perform free stream disturbance measurements in the shock wind tunnel of the Institute for Aerodynamics and Gasdynamics at Stuttgart University. It is shown that such a system brings real advantages in terms of testing time. The change of bridge dynamic behaviour with wire temperature is taken into account by measuring the bridge frequency response with a very fast electrical test and postprocessing the data. The method of operation is validated in a supersonic suck down wind tunnel and a comparison with a commercial constant temperature bridge shows good agreement. Results of free stream disturbance measurements in a short duration supersonic wind tunnel of 120ms testing time are presented.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2001 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable