Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T10:16:29.027Z Has data issue: false hasContentIssue false

Effects of an Initial Gap on the Turbulent Jet Flow over a Curved Wall

Published online by Cambridge University Press:  04 July 2016

S. C. Paranjpe
Affiliation:
Department of Mechanical Engineering, University of Windsor, Canada
K. Sridhar
Affiliation:
Department of Mechanical Engineering, University of Windsor, Canada

Summary

The flow in a two-dimensional curved wall jet with different initial gaps between the nozzle exit and the leading edge of the wall was probed at various stations along the jet. The jet slot thickness, the jet exit velocity and the radius of the wall were kept constant. It was found that the region close to the leading edge of the wall behaved like a settling zone. In this zone the type of flow changed from a free jet to a curved wall jet. The length required for settling depended on gap size and was less than that of the plane wall jet. Gap effects on surface pressure distribution and angular position of separation were examined. The hysteresis phenomenon associated with gaps was investigated.

Information

Type
Technical notes
Copyright
Copyright © Royal Aeronautical Society 1968 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable