Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T16:04:58.843Z Has data issue: false hasContentIssue false

Incipient separation on flared bodies at hypersonic speeds

Published online by Cambridge University Press:  04 July 2016

K. Kontis
Affiliation:
Gas Dynamics LaboratoryNagoya UniversityNagoya, Japan
J. L. Stollery
Affiliation:
Cranfield College of AeronauticsCranfield UniversityCranfield, UK

Abstract

The aerodynamic effectiveness of a cylinder-flare body at zero incidence under laminar and turbulent boundary-layer conditions has been studied experimentally. Two nose geometries, namely a 10° half-angle sharp cone and a hemisphere, were used. The study has been carried out in a hypersonic gun tunnel at a Mach number of 8·2 and a Reynolds number of 158,100, based on the cylinder diameter, at flare angles 0°, 10°, 20°, 30° and 45°. The surface flow was studied using oil-dot and liquid crystal techniques. Some information regarding the shock layer was obtained from schlieren pictures. The effects of entropy layer and boundary-layer state on flare effectiveness were deduced from pressure measurements over the cylinder and the flare.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1999 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable