Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T11:18:10.544Z Has data issue: false hasContentIssue false

Primary Instability of a Panel of Integral Construction with Unflanged Stiffeners

Published online by Cambridge University Press:  28 July 2016

Syed Yusuff*
Affiliation:
The Bristol Aeroplane Company Ltd.

Summary

A theory of primary failure of compression panels of integral construction with unflanged stiffeners is presented, involving rotation, or translation, or rotation and translation of the stiffeners with the corresponding distortion of the sheet without deformation of the cross sections in their own planes. The investigation shows that the failure may occur generally either by pure torsion of the stiffener with the associated lateral distortion of the sheet or by pure flexure in accordance with whichever mode yields a smaller stress. The theory is compared with the test results covering a fairly wide range of the dimensions involved. The theory is in complete agreement with the experiments. The accuracy of the result thus obtained indicates that the fillets at the junction of the skin and the stiffener are not important and their effects may safely be disregarded.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1954

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable