Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T02:34:56.574Z Has data issue: false hasContentIssue false

Rotary Inertia and Shear in Beam Vibration Treated by the Ritz Method

Published online by Cambridge University Press:  04 July 2016

B. Dawson*
Affiliation:
University of Surrey

Summary

The natural frequencies of vibration of a cantilever beam allowing for rotary inertia and shear deformation are obtained by the approximate Ritz method.

The workability of the method is dependent upon the approximating functions chosen for the dynamic displacement curves. A series of characteristic functions representing the normal modes of vibration of cantilever beams in simple flexure is used as the approximating functions for both deflections due to flexure and shear deformation. Good agreement is shown between frequencies obtained by the Ritz method and those resulting from an analytical solution.

The effect upon the natural frequencies of allowing for rotary inertia alone is shown and it is seen to increase rapidly with mode number.

Information

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1968 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable