Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T07:48:32.001Z Has data issue: false hasContentIssue false

Structural Aluminium Alloys For High Speed Flight*

Published online by Cambridge University Press:  04 July 2016

W. M. Doyle*
Affiliation:
Research Division, High Duty Alloys Ltd

Extract

There is a scarcity of specific design data which can be presented to the aircraft designer to enable him to assess the most suitable structural aluminium alloy for a high speed civilian transport aircraft. The problem is essentially due to the relatively low range of elevated temperatures, in which he is interested, coupled with the very long life requirements for a commercial transport aircraft flying at speeds at which it is possible to consider the use of aluminium alloys.

Although the firm with which the author is associated has a vast experience in the development and knowledge of aluminium alloys for aero-engine and gas turbine purposes, it has never been required, in the past, to consider engine applications much below about 200°C, and the design data, which was determined over many years and provided as a service, satisfied the engine designers if the period of test was up to 1,000 hours. On the other hand, to the designer of aircraft for subsonic flight, kinetic heating is no problem at all, and he is quite satisfied with a knowledge of the room temperature properties of the various alloys.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1960

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable