Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T12:16:47.752Z Has data issue: false hasContentIssue false

The Superorbital Expansion Tube concept, experiment and analysis

Published online by Cambridge University Press:  04 July 2016

A. J. Neely
Affiliation:
Department of Mechanical Engineering, The University of Queensland, Brisbane, Australia
R. G. Morgan
Affiliation:
Department of Mechanical Engineering, The University of Queensland, Brisbane, Australia

Abstract

In response to the need for ground testing facilities for super orbital re-entry research, a small scale facility has been set up at the University of Queensland to demonstrate the Superorbital Expansion Tube concept. This unique device is a free piston driven, triple diaphragm, impulse shock facility which uses the enthalpy multiplication mechanism of the unsteady expansion process and the addition of a secondary shock driver to further heat the driver gas. The pilot facility has been operated to produce quasi-steady test flows in air with shock velocities in excess of 13 km/s and with a usable test flow duration of the order of 15 μs. An experimental condition produced in the facility with total enthalpy of 108 MJ/kg and a total pressure of 335 MPa is reported. A simple analytical flow model which accounts for non-ideal rupture of the light tertiary diaphragm and the resulting entropy increase in the test gas is discussed. It is shown that equilibrium calculations more accurately model the unsteady expansion process than calculations assuming frozen chemistry. This is because the high enthalpy flows produced in the facility can only be achieved if the chemical energy stored in the test flow during shock heating of the test gas is partially returned to the flow during the process of unsteady expansion. Measurements of heat transfer rates to a flat plate demonstrate the usability of the test flow for aerothermodynamic testing and comparison of these rates with empirical calculations confirms the usable accuracy of the flow model.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1994 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable