Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T03:25:33.912Z Has data issue: false hasContentIssue false

Alleviation of pitch-up on delta wings using distributed porosity

Published online by Cambridge University Press:  04 July 2016

L. W. Traub
Affiliation:
Aerospace Engineering Department, Texas A&M University, Texas, USA
B. Moeller
Affiliation:
Aerospace Engineering Department, Texas A&M University, Texas, USA
S. F. Galls
Affiliation:
Aerospace Engineering Department, Texas A&M University, Texas, USA

Abstract

An experimental investigation was undertaken to determine the effectiveness of distributed surface porosity for the alleviation of pitch-up on a delta wing. Tests were undertaken using a 65° sweep delta wing with distributed porosity evaluated at various locations on the wing. Force balance, on and off surface flow visualisation and flow field surveys using a multi-hole probe were undertaken. The data shows that distributed porosity applied along the wing leading edge at the apex is effective in eliminating pitch-up whilst incurring a minimal performance cost. Trailing edge porosity generally degraded performance.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1999 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable