Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T00:32:54.910Z Has data issue: false hasContentIssue false

An analysis approach toward FAA certification for damage tolerance of aircraft components

Published online by Cambridge University Press:  27 January 2016

F. Abdi*
Affiliation:
Alpha Star Corporation, Long Beach, California, USA
Y. Xue
Affiliation:
Alpha Star Corporation, Long Beach, California, USA
M. Garg
Affiliation:
Alpha Star Corporation, Long Beach, California, USA
B. Farahmand
Affiliation:
Alpha Star Corporation, Long Beach, California, USA
J. Housner
Affiliation:
Alpha Star Corporation, Long Beach, California, USA
K. Nikbin
Affiliation:
Imperial College, London, UK
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper presents a novel analysis approach by considering multiple crack interaction in achieving FAA certification for durability and damage tolerance of exterior attachment installations on an aircraft fuselage according to FAA policy on Certification by Analysis-Supported-by-Test (CAST). Durability and damage tolerance evaluation of an aircraft component requires assessment of damage initiation and fatigue crack propagations under service loading, which consists of complex loading types, paths and variable amplitudes. Both simulation and service experience showed that multiple cracks developed in the fuselage skin and doublers that are made of wrought aluminum alloys. Progressive failure analysis (PFA) tool was used to simulate the fatigue damage initiation life using a scale-down stress-life property. A virtual crack closure technique (VCCT) was implemented to evaluate fatigue crack growth with interactions between cracks from different parts in a component, which preserves conservativeness. The fatigue crack growth data is obtained uniquely from an analytical extension of fatigue crack growth data of thin aluminum sheet. Fatigue crack growth analysis showed that only a few initiated cracks propagated steadily before a crack became visible under inspection, which was validated by comparison to service history. Eventually one crack became dominate in the fracturing process thereby setting an inspection time. Analysis also showed that fatigue damage state in the components at the designed operational life will not exceed the static safety requirements. Therefore, FAA accepted the damage tolerance analysis and the aircraft retained certification with no need for repair.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2014