Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T08:56:33.182Z Has data issue: false hasContentIssue false

Analysis of helicopter vibratory hub loads alleviation by cyclic trailing-edge blade flap actuation

Published online by Cambridge University Press:  03 February 2016

M. Gennaretti
Affiliation:
m.gennaretti@uniroma3.it, University Roma Tre, Department of Mechanical and Industrial Engineering, Rome, Italy
M. Molica Colella
Affiliation:
mmolica@uniroma3.it
G. Bernardini
Affiliation:
g.bernardini@uniroma3.it
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The aim of the present work is the investigation about the use of blade trailing-edge flaps for the reduction of vibratory loads arising at the hub of helicopter main rotors in forward flight. The alleviation of these loads is achieved through multicyclic higher harmonic actuation of the blade flaps, which is related to measured vibratory loads amplitude. The feedback control law is obtained by an optimal control process based on the minimisation of a cost function, under the constraint of compatibility with the nonlinear equations governing blade aeroelasticity. In the numerical investigation concerning a four-bladed rotor in level flight conditions, a computationally efficient local controller methodology is applied, with the attention focused on the effectiveness of the control algorithm, along with its robustness with respect to differences (existing in real applications) between the aeroelastic models used for control law synthesis and validation.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2009