Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T18:50:27.927Z Has data issue: false hasContentIssue false

Applying a distributed collaborative MDAO environment to study the power matching of the propulsion system and the on-board electrified systems for advanced regional and short- to medium-range jetliners

Published online by Cambridge University Press:  16 October 2019

M. Fioriti*
Affiliation:
Politecnico di Torino, Turin, Italy
A. Mirzoyan
Affiliation:
Central Institute of Aviation Motors, Moscow, Russia
A. Isianov
Affiliation:
Central Institute of Aviation Motors, Moscow, Russia
Rights & Permissions [Opens in a new window]

Abstract

This paper deals with the study of the power matching of the propulsion system and on-board systems changing the on-board systems’ electrification level. In particular, four system architectures have been studied, each one with a different level of electrification starting from the More Electric Aircraft (MEA) to the All Electric Aircraft (AEA) systems. The mass and the power requirement of each system architectures have been analysed together with the change in engine specific fuel consumption. Then, these results have been used to quantify the influences of engine and systems power matching to the entire aircraft. In particular, the beneficial effect of system electrification has been evaluated as an increment of aircraft range. Moreover, two reference aircraft – a regional jet and a short/medium range liner – have been selected to understand the variance of the power matching changing aircraft dimensions and mission range. The study is carried out using a distributed and collaborative Multi-Disciplinary Design Analysis and Optimization (MDAO) environment. The results show a beneficial effect of systems electrification on systems mass and engine specific fuel consumption. At aircraft level, the results point out an increment of aircraft range up to 7.7% with a different trend for the two studied cases.

Information

Type
Research Article
Copyright
© Royal Aeronautical Society 2019 
Figure 0

Figure 1.MDAO workflow developed within AGILE research project.

Figure 1

Table 1Main input and output of PS and OBS disciplinary modules

Figure 2

Figure 2.Flight envelope with different flight segments for RJ engine.

Figure 3

Table 2Baseline engines for RJ and SMRJ reference aircraft

Figure 4

Figure 3.Internal process of OBS design module (ASTRID tool).

Figure 5

Figure 4.Conventional OBS architecture. The systems in bullet points represents the subsystems supplied by respectively electric, hydraulic and pneumatic generation.

Figure 6

Figure 5.MEA1 OBS architecture. The systems in bullet points represents the subsystems supplied by respectively electric, and pneumatic generation.

Figure 7

Figure 6.MEA2 OBS architecture. The systems in bullet points represents the subsystems supplied by respectively electric, hydraulic and pneumatic generation.

Figure 8

Figure 7.AEA OBS architecture. The systems in bullet points represents the subsystems supplied by electric and pneumatic generation.

Figure 9

Table 3Main specifications of reference RJ

Figure 10

Figure 8.Mission profile for RJ and SMRJ reference aircraft.

Figure 11

Table 4Main specifications of SMRJ

Figure 12

Table 5Mass breakdown for each OBS architecture for RJ

Figure 13

Table 6Total power offtakes for each OBS architecture in cruise condition for RJ. All values are per engine

Figure 14

Figure 9.Influence of bleed airflow rate on relative installed SFCMCR.

Figure 15

Figure 10.Influence of mechanical power offtakes on relative installed SFCMCR.

Figure 16

Figure 11.Influence of minimal air bleed pressure on relative installed SFCMCR.

Figure 17

Table 7Influences of OBS electrification on PS and aircraft mission range compared to Conventional configuration applied to RJ

Figure 18

Table 8Mass breakdown for each OBS architecture for SMRJ

Figure 19

Table 9Total power offtakes for each OBS architecture in cruise condition for SMRJ

Figure 20

Table 10Influences of OBS electrification on PS and aircraft mission range compared to Conventional configuration applied to SMRJ

Figure 21

Table 11Comparison of the influences of OBS electrification for both reference aircraft (relative values compared to Conventional OBS architecture)

Figure 22

Figure 12.Effect of OBS electrification on systems mass.

Figure 23

Figure 13.Influence of OBS electrification on relative PS SFC in cruise conditions.

Figure 24

Table 12Comparison of power offtakes for RJ and SMRJ

Figure 25

Figure 14.Influence of OBS electrification on aircraft range.