Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T07:27:08.775Z Has data issue: false hasContentIssue false

Calibration of a Cruciform Wind Vane Configuration at Subsonic and Supersonic Speeds

Published online by Cambridge University Press:  04 July 2016

F. W. Dee
Affiliation:
Royal Aircraft Establishment, Bedford
D. G. Mabey
Affiliation:
Royal Aircraft Establishment, Bedford

Extract

Incidence and sideslip must be measured accurately in aircraft performance and stability tests. A convenient method is to install wind vanes on a nose boom. When only one sideslip and one incidence vane are fitted, mutual interference occurs, and the vanes do not indicate the true flow direction. This interference can be 0·5° at 0° incidence at subsonic and supersonic speeds. Thus a symmetric configuration of vanes is essential for accurate measurements of incidence and sideslip.

A cruciform arrangement of four wind vanes was fitted around the nose boom Pitot head of the Fairey Delta 2 supersonic research aircraft. The effect of the Pitot boom on the vane sensitivity was determined by a calibration of the aircraft vanes on a duplicate Pitot-static head in the R.A.E. Bedford 3 ft wind tunnel.

The effects of the fuselage and the wing upwash are only present at subsonic speeds and can be estimated.

Information

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1963

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable