Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T06:30:14.035Z Has data issue: false hasContentIssue false

Downward pointing winglet design and assessment within the M-DAW research project

Published online by Cambridge University Press:  03 February 2016

J.-L. Hantrais-Gervois
Affiliation:
Jean-Luc.Hantrais-Gervois@onera.fr and Richard.Grenon@onera.fr, ONERA, Meudon, France
R. Grenon
Affiliation:
Jean-Luc.Hantrais-Gervois@onera.fr and Richard.Grenon@onera.fr, ONERA, Meudon, France
A. Mann
Affiliation:
alan.mann@airbus.com, Airbus, Filton, Bristol, UK
A. Büscher
Affiliation:
alexander.buescher@airbus.com, Technische Universität Braunschweig, Braunschweig, Germany
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The design and performance analysis of a wing tip device proposed within the M-DAW project by ONERA is presented. A proto-design process is described and the device was thoroughly assessed (mainly with Reynolds-Averaged Navier-Stokes simulations). The process was further explained through wind-tunnel tests at both low speed and high speed in the pressurised and cryogenic European transonic wind tunnel in Cologne. The device is a downward pointing winglet designed for a retrofit scenario (the wing could be modified only within the 96% – 100% bounds of the span). It was designed to keep the wing root bending moment of the clean wing at cruise unchanged so that the aerodynamic gains are the net gains provided by the device that can be directly installed without structural modifications of the wing.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2009