Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T05:15:57.061Z Has data issue: false hasContentIssue false

Drag reduction on a spiked body at hypersonic speed

Published online by Cambridge University Press:  03 February 2016

G. d’Humières
Affiliation:
guillaume.dhumieres@ecl2009.ec-lyon.fr, School of Engineering, Cranfield University, Bedford, UK
J. L. Stollery
Affiliation:
j.l.stollery@cranfield.ac.uk
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Fitting a spike on a blunt body provides a drag reduction at supersonic and hypersonic speeds. In this study, the laminar flow over a spiked, conical body terminated by a spherical cap, inspired by the Apollo re-entry capsule design, was investigated using a hypersonic wind tunnel. Schlieren pictures revealed the absence of flow unsteadiness for the range of spike lengths tested, and force measurements showed a maximum reduction of 77% of the unspiked body drag.

A simple theoretical model based on the pressure drag generated by a solid cone showed good agreement with the experimental data. The measured shock stand-off distance agreed well with predictions.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2010