Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T07:05:48.643Z Has data issue: false hasContentIssue false

Effects of an Initial Gap on the Flow in a Turbulent Wall Jet

Published online by Cambridge University Press:  04 July 2016

K. Sridhar
Affiliation:
Department of Mechanical Engineering, University of Windsor, Canada
P. K. C. Tu
Affiliation:
Department of Mechanical Engineering, University of Windsor, Canada

Summary

The flow in a two-dimensional plane wall jet with different initial gaps between the nozzle exit and the leading edge of the wall was probed at various stations along the jet. The jet slot thickness and the velocity were kept constant. It was found that the region close to the leading edge of the wall behaved like a transforming region where the type of flow changed from a free jet to a wall jet. The length of this region, which depended directly on the gap size, was so short for small gaps that the gap effects were found to be negligible. In addition, it was found that the inner layer velocity distribution of a wall jet did not follow the classic one-seventh power law.

Information

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1966

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable