Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T19:52:25.564Z Has data issue: false hasContentIssue false

Energy requirements for the flight of micro air vehicles

Published online by Cambridge University Press:  04 July 2016

M. I. Woods
Affiliation:
Department of Mechanical Engineering, University of Bath, UK
J. F. Henderson
Affiliation:
Department of Mechanical Engineering, University of Bath, UK
G. D. Lock
Affiliation:
Department of Mechanical Engineering, University of Bath, UK

Abstract

This paper describes power requirements for micro air vehicles, flying in the Reynolds number regime of -lO*. Three flight modes have been researched: fixed wing, rotary wing and flapping wing. For each mode, the literature in the public domain has been reviewed to obtain appropriate lift and drag coefficient data at these low Reynolds numbers. Energy and power requirements for the three flight modes have been calculated and an optimisation procedure has been utilised to evaluate the most efficient flight mode and configuration for a variety of specified missions. The effect of wind-speed on the optimal solution has been examined. It has been discovered that when there is no hover requirement, fixed wing flight is always most energy efficient for the micro air vehicle. However, if there is a hover requirement, the suitability of flapping or rotary wing flight is dependent on the mission profile and ambient windspeed.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2001 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable