Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T09:31:56.387Z Has data issue: false hasContentIssue false

Experimental and numerical failure analysis of bolted joints in CFRP woven laminates

Published online by Cambridge University Press:  04 July 2016

N. Andréasson
Affiliation:
Department of AeronauticsImperial College of Science, Technology and Medicine , London, UK
C. P. Mackinlay
Affiliation:
Department of AeronauticsImperial College of Science, Technology and Medicine , London, UK
C. Soutis
Affiliation:
Department of AeronauticsImperial College of Science, Technology and Medicine , London, UK

Abstract

The purpose of a joint is to transfer load between the two parts being joined. As a result of this load transfer there will be a stress variation in the components in the joint region, as well as stresses in the joining medium (fasteners or adhesive). In fhjs work, the stress results of a two-dimensional finite element (FE) analysis are used to understand failure modes of a bolted joint in low-temperature cure carbon fibre reinforced plastic (CFRP) woven laminates loaded in tension, and to predict the bearing strength. Good agreement with experimentally observed damage modes and strengths is achieved with, in some cases, a difference of less than 10%.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1998 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable