Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T13:45:00.613Z Has data issue: false hasContentIssue false

Experimental study of unsteadiness in supersonic shock-wave/turbulent boundary-layer interactions with separation

Published online by Cambridge University Press:  03 February 2016

D. Estruch
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
D. G. MacManus
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
D. P. Richardson
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
N. J. Lawson
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
K. P. Garry
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
J. L. Stollery
Affiliation:
Department of Aerospace Sciences, Cranfield University, Cranfield, UK
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Shock-wave/turbulent boundary-layer interactions (SWTBLIs) with separation are known to be inherently unsteady but their physical mechanisms are still not totally understood. An experimental investigation has been performed in a supersonic wind tunnel at a freestream flow Mach number of 2·42. The interaction between a shock wave created by a shock generator (α = 3°, α = 9°, α = 13° and α = 15° deflection angles) and a turbulent boundary layer with thickness δ = 5mm has been studied. High-speed Schlieren visualisations have been obtained and used to measure shock wave unsteadiness by means of digital image processing. In the interactions with separation, the reflected shock’s unsteadiness has been in the order of 102Hz. High-speed wall pressure measurements have also been obtained with fast-response micro-transducers along the interactions. Most of the energy of the incoming turbulent boundary layer is broadband and at high frequencies (>104Hz). An addition of low-frequency (<104Hz) fluctuation energy is found at separation. Along the interaction region, the shock impingement results in an amplification of fluctuation energy due to the increase in pressure. Under the main recirculation region core there is only an increase in high frequency energy (>104Hz). Amplification of lower frequency fluctuation energy (>103Hz) is also observed close to the separation and reattachment regions.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2010