Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T00:53:57.122Z Has data issue: false hasContentIssue false

Extensive 3D analysis for fluid–structure interaction of spanwise flexible plunging wing 3D FSI Analysis for Spanwise Flexible Plunging Wing

Published online by Cambridge University Press:  13 March 2019

H. Cho*
Affiliation:
BK21 Plus Transformative Training Program for Creative Mechanical and Aerospace Engineers, Institute of Advanced Machines and Design, Seoul National University, Seoul, Republic of Korea
N. Lee*
Affiliation:
R&D Strategy Team, Vehicle & Launcher System R&D Division, Hanwha Defense Systems, Gyeongsangnam-do, Republic of Korea
S.-J. Shin*
Affiliation:
Department of Mechanical and Aerospace Engineering, Institute of Advanced Aerospace Technology, Seoul National University, Seoul, Republic of Korea
S. Lee*
Affiliation:
Department of Aerospace Engineering, Inha University, Incheon, Republic of Korea
Rights & Permissions [Opens in a new window]

Abstract

In this study, an improved fluid–structure interaction (FSI) analysis method is developed for a flapping wing. A co-rotational (CR) shell element is developed for its structural analysis. Further, a relevant non-linear dynamic formulation is developed based on the CR framework. Three-dimensional preconditioned Navier–Stokes equations are employed for its fluid analysis. An implicit coupling scheme is employed to combine the structural and fluid analyses. An explicit investigation of a 3D plunging wing is conducted using this FSI analysis method. A further investigation of this plunging wing is performed in relation to its operating condition. In addition, the relation between the wing’s aerodynamic performance and plunging motion is investigated.

Information

Type
Research Article
Copyright
© Royal Aeronautical Society 2019 
Figure 0

Figure 1Co-ordinates and elemental kinematics in the CR formulation for 3-node shell.

Figure 1

Table 1Operating conditions

Figure 2

Figure 2Cross-section of the flexible and highly flexible wings(6).

Figure 3

Figure 3Discretisation information in the present FSI analysis.

Figure 4

Table 2Structural properties used in the previous studies(14,19)

Figure 5

Figure 4Comparison of the thrust coefficient history.

Figure 6

Table 3Summary of averaged values of the thrust coefficient history

Figure 7

Figure 5Comparison of the wing tip displacement history.

Figure 8

Table 4Summary of peak-to-peak value and phase difference in the wing tip displacement history

Figure 9

Figure 6Pressure coefficient, CP, on the surface of the flexible wing (kG=1.82).

Figure 10

Figure 7Pressure coefficient, CP, on the surface of the highly flexible wing (kG=1.82).

Figure 11

Figure 8Comparison of the averaged CT with respect to kG (kG=0–4.8).

Figure 12

Figure 9Comparison of the wing tip amplitude with respect to kG (kG=0–4.8).

Figure 13

Figure 10Comparison of phase shift in wing tip displacement with respect to kG (kG=0-4.8).

Figure 14

Figure 11Comparison of the averaged power coefficient with respect to kG (kG=0-4.8).

Figure 15

Figure 12Pressure coefficient, CP, on the surface of the flexible wing at 0.00t/T (kG=1.82–4.80).

Figure 16

Figure 13Pressure coefficient, CP, on the surface of the highly flexible wing at 0.00t/T (kG=1.82–4.80).

Figure 17

Figure 14Iso-surfaces of the vorticity magnitude around the flexible wing.

Figure 18

Figure 15Iso-surfaces of the vorticity magnitude around the highly flexible wing.