Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T16:44:14.987Z Has data issue: false hasContentIssue false

In-flight Ice formation simulation on finite wings and air intakes

Published online by Cambridge University Press:  27 January 2016

S. Özgen*
Affiliation:
Middle East Technical University, Dept. Aerospace Engineering, Ankara, Turkey
M. Canıbek*
Affiliation:
Turkish Aerospace Industries, Flight Sciences Department, Ankara, Turkey
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In the present article, in-flight ice formation on finite wings and air intakes of low-speed aircraft are numerically studied. The approach to the problem involves calculation of the velocity field using a three-dimensional panel method. Using the calculated velocity field, the droplet trajectories and droplet impact locations are computed yielding the droplet collection efficiency distribution. In the next step, convective heat transfer coefficient distributions around the geometries are calculated using a two-dimensional Integral Boundary-Layer Method, which takes surface roughness due to ice accretion into account. A thermodynamic analysis employing the Extended Messinger Method yields the ice growth rates. Integration of these rates over time yields the ice shapes, hence the modified geometry. Predicted ice shapes are compared with experimental shapes reported in the literature and good agreement is observed. Ice shapes around vastly varying geometries including complex shapes are successfully computed. As such, the developed tool may be used for academical purposes or for airworthiness certification efforts.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2012