Hostname: page-component-74656f9884-8r8nv Total loading time: 0 Render date: 2026-11-09T15:34:57.354Z Has data issue: false hasContentIssue false

Longitudinal flight control design with handling quality requirements

Published online by Cambridge University Press:  03 February 2016

D. Saussié
Affiliation:
Department of Electrical Engineering, École Polytechnique de Montréal, Montréal, Canada
L. Saydy
Affiliation:
Department of Electrical Engineering, École Polytechnique de Montréal, Montréal, Canada
O. Akhrif
Affiliation:
Department of Electrical Engineering, École de Technologie Supérieure, Montréal, Canada
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This work presents a method for selecting the gain parameters of a C* control law for an aircraft’s longitudinal motion. The design incorporates various handling quality requirements involving modal, time- and frequency-domain criteria that were fixed by the aircraft manufacturer. After necessary model order-reductions, the design proceeds in essentially two-steps: stability augmentation system (SAS) loop design and control augmentation system (CAS) loop design. The approach partly relies on the use of guardian maps to characterise, in each case, the set of gain parameters for which desired handling quality requirements are satisfied. The approach is applied throughout the full flight envelope of a business jet aircraft and yields satisfactory results.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2006