Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T19:40:42.615Z Has data issue: false hasContentIssue false

The Mechanism and Application of Effusion Cooling*

Published online by Cambridge University Press:  04 July 2016

P. Grootenhuis*
Affiliation:
Mechanical Engineering Department, Imperial College of Science and Technology

Extract

Effusion cooling consists in forcing a gas under pressure through a porous material thereby absorbing heat from the material and forming a heat insulating layer on the exposed surface. The internal heat transfer between the porous material and coolant is considered and the heat transfer coefficient obtained from experiment. An approximate analysis for the heat insulating effect based on a heat balance method is derived in detail and applied to experiments with porous plugs set into the side of a duct carrying hot gases, and to porcras cylinders swept by hot gases. It has been found that this analysis applies reasonably accurately to the results of these experiments and of most of the published data. The manufacture of porous materials is discussed briefly and a representative list of commercially available materials is included. The application of effusion and sweat cooling to the blading and combustion chamber linings for gas turbines, rocket motors and the outside skin of flying vehicles is considered.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1959

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable