Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:22:53.182Z Has data issue: false hasContentIssue false

Modelling and vibration of a non-classical tilt-rotor wing system

Published online by Cambridge University Press:  03 February 2016

O. Song
Affiliation:
Department of Mechanical Engineering, Chungnam National University, Daejeon, South Korea
H. D. Kwon
Affiliation:
Department of Mechanical Engineering, Chungnam National University, Daejeon, South Korea
L. Librescu
Affiliation:
Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Problems related with the mathematical modelling and eigenvibration of a tiltrotor aircraft-wing system built up of anisotropic composite materials are investigated. The wing-mounted rotor that can tilt from the vertical position to a horizontal one is modelled and analysed from the vibrational point of view. In this sense, its behaviour is analysed as a function of the mass size, mass moment of inertia, tilt angle and spin speed of the spinning rotor and of its location along the wing span. While the rotor is considered to be rigid, the aircraft wing is modelled as a thin-walled beam that features a doubly-symmetric cross-section contour and incorporates the elastic coupling between flap-lag-transverse shear, on one hand, and between extension-twist, on the other hand. Numerical simulations are provided and pertinent conclusions are outlined.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2007