Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T13:47:23.480Z Has data issue: false hasContentIssue false

Modification impact on aerodynamic performance of hypersonic waverider

Published online by Cambridge University Press:  27 January 2016

H. Zhong-Xi
Affiliation:
College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha, China
L. Jian-Xia
Affiliation:
College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha, China
G. Xian-Zhong
Affiliation:
College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha, China
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Waverider serves as a good candidate for hypersonic vehicles. The typical waverider has sharp leading edge and no control face, which is inappropriate for practical use. This paper puts forward a method modifying the waverider, and the modification impact on the performance of waverider at hypersonic flow conditions is studied. The modification is based on blunted waverider, includes cutting the tip and introducing two control wings. The modification’s effect on aerodynamic performance is obtained and analysed through Computational Fluid Dynamics (CFD) techniques. When blunted with 2cm radius, the waverider retains its good aerodynamic performance and the heat flux at the stagnation point can be managed. Three factors of the introduced wing are argued, the fixed angle, aspect ratio and wing area. Results show that influence on the aerodynamic coefficient is slight and the vehicle retains its high lift-to-drag ratio. The main influences of the modification are the control ability and trim efficiency, which is the motivation of this work and can be adapted when designing a practical waverider.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2011