Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T00:51:45.174Z Has data issue: false hasContentIssue false

New adaptive controller method for SMA hysteresis modelling of a morphing wing

Published online by Cambridge University Press:  03 February 2016

T. L. Grigorie
Affiliation:
Laboratory of Research in Active Controls, Avionics and AeroServoElasticity LARCASE, École de Technologie Supérieure, www.larcase.etsmtl.ca, Montréal, Quebec, Canada
R. M. Botez
Affiliation:
Laboratory of Research in Active Controls, Avionics and AeroServoElasticity LARCASE, École de Technologie Supérieure, www.larcase.etsmtl.ca, Montréal, Quebec, Canada
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A neuro-fuzzy controller method for smart material actuator (SMA) hysteresis modelling is presented, conceived for a morphing wing application. The controller correlates each set of forces and electrical currents that are applied to the smart material actuators with the actuator elongation. The actuator is experimentally tested for four forces, using a variable electrical current. The final controller is obtained through the Matlab/Simulink integration of three independent neuro-fuzzy controllers, designed for the increase and decrease of electrical current, and for null electrical current in the cooling phase of the actuator. This final controller gives a very small error with respect to the experimental values.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2010