Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T14:14:44.271Z Has data issue: false hasContentIssue false

Non-linear vibration of rotating cantilever blades treated by the Ritz averaging process

Published online by Cambridge University Press:  04 July 2016

J. S. Rao
Affiliation:
Indian Institute of Technology, Kharagpur
W. Carnegie
Affiliation:
University of Surrey, Guildford

Extract

The prediction of the forced vibration response of rotating cantilever blading is of considerable importance in the design of turbine and compressor blading where the rotational speeds are relatively high. Non-linearities in the blades arise from the effects of Coriolis accelerations due to the rotation of the blades mounted on the periphery of the disc.

Lo and Renbarger derived the differential equations of motion of a cantilever beam mounted on a rotating disc at a given stagger angle and show, for a linear case, that the frequencies of a bar vibrating transversely to a plane inclined at an angle to the plane of rotation can be found by a simple transformation of the frequencies of vibration perpendicular to the plane of rotation. Boyce, Di Prima and Handelman applied the Rayleigh-Ritz and Southwell methods to the case of a turbine blade vibrating perpendicular to the plane of rotation and determined the upper and lower bounds of the natural frequencies.

Information

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1972 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable