Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T00:56:39.105Z Has data issue: false hasContentIssue false

Numerical and experimental testing of aircraft tyre impact during landing

Published online by Cambridge University Press:  07 July 2021

Y. Gan
Affiliation:
College of Aerospace Engineering Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu, 210016 China
X. Fang
Affiliation:
College of Aerospace Engineering Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu, 210016 China
X. Wei*
Affiliation:
College of Aerospace Engineering Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu, 210016 ChinaState Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing Jiangsu, 210016 China
H. Nie
Affiliation:
College of Aerospace Engineering Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu, 210016 ChinaState Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing Jiangsu, 210016 China
Rights & Permissions [Opens in a new window]

Abstract

The capability of aircraft tyres to sustain landing impact loads is essential for flight landing safety. Hence, the development of a reliable experimental database is necessary to validate numerical models. The experimental data on aircraft tyre landing impact in the public literature are somewhat sparse. This paper describes a detailed design rig for aircraft tyre impact testing. A finite element model is then created and simulated using a finite element tool (ABAQUS). Inflation and static load simulations are analysed based on the FE tyre model to confirm its reliability. Comparison of experimental measurements with the results reveals that the model can predict the significant features of aircraft tyre impact in a landing scenario. Very little experimental data are publicly available to verify aircraft tyre models. Therefore, the experimental data in this paper fill this gap in the literature.

Information

Type
Research Article
Copyright
© The Author(s), 2021. Published by Cambridge University Press on behalf of Royal Aeronautical Society
Figure 0

Table 1Test conditions adopted in the experimental programme

Figure 1

Table 2Detailed technical parameters of the sensors

Figure 2

Figure 1.Experimental test set-up.

Figure 3

Figure 2.Cross-section of the tyre model.

Figure 4

Table 3Rubber properties adopted in the simulation

Figure 5

Figure 3.Orientation angle.

Figure 6

Table 4Reinforcement properties, parameters in the simulation

Figure 7

Table 5Geometric properties of reinforcement materials in the simulation

Figure 8

Table 6Tyre inflation test and simulation results

Figure 9

Figure 4.Tyre cross-section after inflation.

Figure 10

Figure 5.Deformation of aircraft tyres in static load scenario.

Figure 11

Figure 6.Deflection versus vertical load curves.

Figure 12

Figure 7.FE model of aircraft tyre in ABAQUS.

Figure 13

Table 7Test and simulation conditions

Figure 14

Figure 8.Comparison of experimental and simulation images.

Figure 15

Figure 9.Experimental and simulated deflection.

Figure 16

Figure 10.Experimental and simulated force.

Figure 17

Figure 11.Experimental and simulated velocity.

Figure 18

Figure 12.Force versus impact mass and force versus deflection in case A.

Figure 19

Figure 13.Force versus velocity and force versus deflection in case B.

Figure 20

Figure 14.Force versus inflation pressure and force versus deflection in case C.

Figure 21

Table 8Test conditions in case A

Figure 22

Table 9Results in case A

Figure 23

Table 10Test conditions in case B

Figure 24

Table 11Results in case B

Figure 25

Table 12Test conditions in case C

Figure 26

Table 13Results in case C