Hostname: page-component-74656f9884-2dmjx Total loading time: 0 Render date: 2026-11-10T08:44:37.593Z Has data issue: false hasContentIssue false
  • English
  • Français

The numerical simulation of flow about installed aero engine nacelle using a finite element Euler solver on unstructured meshes

Published online by Cambridge University Press:  04 July 2016

J. Peiró ,
J. Peraire ,
K. Morgan ,
O. Hassan  and
N. Birch
J. Peiró
Affiliation:
Department of Aeronautics, Imperial College, London
J. Peraire
Affiliation:
Department of Aeronautics, Imperial College, London
K. Morgan
Affiliation:
Department of Civil Engineering, University College, Swansea
O. Hassan
Affiliation:
CDR, Innovation Centre, University College, Swansea
N. Birch
Affiliation:
Rolls Royce, Derby
Get access Rights & Permissions [Opens in a new window]

Abstract

The application of the unstructured mesh system FLITE3D.0 to the numerical analysis of the inviscid Euler flow past installed aero-engine nacelle is described. The main features of the system are detailed and the approach is demonstrated by simulating the flow over a Rolls-Royce model of a twin-engined civil transport aircraft with long-cowl nacelle powerplants. The computed pressure distributions are compared with the measurements produced by transonic wind tunnel experiments.

Information

Type
Research Article
Information
The Aeronautical Journal , Volume 96 , Issue 956 , July 1992 , pp. 224 - 232
Copyright
Copyright © Royal Aeronautical Society 1992 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Lord, W. K. and Zysman, S. H. VSAERO Asclysis of a wing/pylon/nacelle configuration, AIAA Paper 86-1523, 1986.Google Scholar
2. Chen, A. W., Curtin, M. M.,Carlson, R. B. and Tinoco, E.N.TRANAIR applications to engine/airframe integration, AIAA Paper 89-2165, 1989.Google Scholar
3. Weatherill, N. P., Shaw, J. A., Forsey, C. R. and Rose, K. R. A discussion on a mesh generation technique applicable to complex geometries. AGARD Conference Proceedings No. 412, AGARD, Paris, 1986.Google Scholar
4. Baker, T. J. Unstructured mesh generation by a generalised Delaunay algorithm, AGARD Conference Proceedings No. 464, AGARD, Paris, 1989.Google Scholar
5. Peraire, J., Morgan, K. and Peiro, J. Unstructured Finite element mesh generation and adaptive procedures for CFD. AGARD Conference Proceedings No. 464, AGARD, Paris, 1989.Google Scholar
6. Jameson, A. and Schmidt, W. Some recent developments in numerical methods for transonic flows, Comp Meth Appl Mech Eng, 1985, 51, pp 467–493.Google Scholar
7. Pugh, G. and Harris, A. E. Establishment of an experimental technique to provide accurate measurement of the installed drag of close-coupled civil nacelle/airframe configurations, using a full span model with turbine powered engine simulators', AGARD Conference Proceedings No. 301, AGARD, Paris, 1981.Google Scholar
8. Peiro, J., Peraire, J. and Morgan, K. The generation of triangular meshes on surfaces, in: Applied Surface Modelling, Edited by Creasy, C. F.M. and Craggs, G., Ellis Horwood, 1990.Google Scholar
9. Peraire, J., Vahdati, M., Morgan, K. and Zienkiewicz, O. C. ’Adaptive remeshing for compressible flow computations, J Comp Phys, 1987, 72, pp 547–574.Google Scholar
10. Peraire, J., Peiro, J., Formaggia, L., Morgan, K. and Zienkiewicz, O.C. Finite element Euler computations in three dimensions', Int J Num Meth Eng, 1988, 26, pp 2135–2159.Google Scholar
11. Peraire, J., Morgan, K. and Peiro, J. Unstructured mesh methods for CFD, von Karman Institute for Fluid Dynamics Lecture Series, Brussels, 1990.Google Scholar
12. Peraire, J., Morgan, K., Peiro, J. and Zienkiewicz, O. C. An adaptive finite element method for high speed flows, AIAA Paper 87-0558, 1987.Google Scholar
13. Zienkiewicz, O. C. and Morgan, K. Finite Elements and Approximation, Wiley, 1983.Google Scholar
14. Jameson, A., Baker, T. J. and Weatherill, N. P. Calculation of inviscid transonic flow over a complete aircraft, AIAA Paper 86-0103.1986.Google Scholar
15. Giles, M. Energy Stability Analysis of Multi-Step Methods on Unstructured Meshes, MIT CFD Laboratory Report CFDL-TR-87-1, 1987.Google Scholar
16. Peraire, J., Peiro, J. and Morgan, K. A 3D finite element multigrid solver for the Euler equations, AIAA Paper 92-0449, 1992.Google Scholar