Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T22:56:08.456Z Has data issue: false hasContentIssue false

Numerical simulation of rim seal flows in axial turbines

Published online by Cambridge University Press:  22 October 2018

J. Boudet
Affiliation:
University of Surrey, Thermo Fluid Systems, Guildford, UK
V. N. D. Autef
Affiliation:
University of Surrey, Thermo Fluid Systems, Guildford, UK
J. W. Chew
Affiliation:
University of Surrey, Thermo Fluid Systems, Guildford, UK
N. J. Hills
Affiliation:
University of Surrey, Thermo Fluid Systems, Guildford, UK
O. Gentilhomme
Affiliation:
University of Sussex, Thermo Fluid Mechanics Research Centre, Brighton,UK
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In a gas turbine, ingestion of hot gas into the high-pressure turbine disc cavities could cause metal overheat. To prevent this, cool air is taken from the compressor and ejected through the cavities. However, this sealing flow also reduces the overall efficiency, and a compromise has to be found between the level of ingestion tolerated and the losses. Recent advances made in applying Computational Fluid Dynamics to such configurations are presented, with the aim of better understanding the physical phenomena and providing reliable design tools. First, results showing the pumping effect of the rotating disc are presented, including the influence of flow instabilities observed in both computational and experimental results. Second, the influence of the main annulus pressure asymmetries are analysed on a simplified representation of an available experiment, showing the combined influence of asymmetries generated by vanes and struts. Finally, a rim seal geometry representative of aero-engine design is studied in comparison to experiment, exhibiting the coupled influence of the cavity instabilities and annulus asymmetries.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2005